6EP3331-6SB00-0AY0

توضیحات

6EP3331-6SB00-0AY0

6EP3331-6SB00-0AY0 Siemens LOGO!POWER 24 V/1.3 A
LOGO!POWER 24 V / 1.3 A Stabilized power supply input: 100-240 V AC
output: DC 24 V / 1.3 A
[vcex_divider color=”#b8cdd9″ width=”100%” height=”5px” margin_top=”5″ margin_bottom=”5″]

Input of 6EP3331-6SB00-0AY0
Input: 1-phase AC or DC
Rated voltage value Vin rated: 100 … 240 V
Voltage range AC: 85 … 264 V
Input voltage at DC: 110 … 300 V
Wide-range input: Yes
Overvoltage resistance: 300V AC for 1s
Mains buffering at Iout rated, min.: 40 ms; at Vin = 187 V
Rated line frequency 1: 50 Hz
Rated line frequency 2: 60 Hz
Rated line range: 47 … 63 Hz
Input current:
● at rated input voltage 120V: 0.7 A
● at rated input voltage 230V: 0.35 A
Switch-on current limiting (+25 °C), max.: 25 A
I²t, max.: 0.8 A²·s
Built-in incoming fuse: internal

Output of 6EP3331-6SB00-0AY0
Output: Controlled, isolated DC voltage
Rated voltage Vout DC: 24 V
Total tolerance, static ±: 3 %
Static mains compensation, approx.: 0.1 %
Static load balancing, approx.: 0.1 %
Residual ripple peak-peak, max.: 200 mV
Residual ripple peak-peak, typ.: 30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz): 300 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz): 50 mV
Adjustment range: 22.2 … 26.4 V
Product function Output voltage adjustable: Yes
Output voltage setting: via potentiometer
Status display: Green LED for output voltage OK
On/off behavio:r No overshoot of Vout (soft start)
Startup delay, max.: 0.5 s
Voltage rise, typ.: 100 ms
Rated current value Iout rated: 1.3 A
Current range: 0 … 1.3 A
● Note +55 … +70 °C: Derating 2%/K
Supplied active power typical: 31.2 W
Parallel switching for enhanced performance: Yes
Numbers of parallel switchable units for enhanced performance: 2

Efficiency of 6EP3331-6SB00-0AY0

Efficiency at Vout rated, Iout rated, approx.: 86 %
Power loss at Vout rated, Iout rated, approx.: 5 W
Power loss [W] during no-load operation maximum: 0.3 W

Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.: 0.2 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.: 1 %
Load step setting time 10 to 90%, typ.: 1 ms
Load step setting time 90 to 10%, typ.: 1 ms

Protection and monitoring of 6EP3331-6SB00-0AY0

Output overvoltage protection: Yes, according to EN 60950-1
Current limitation, typ.: 1.7 A
Property of the output Short-circuit proof: Yes
Short-circuit protection: Constant current characteristic
Enduring short circuit current RMS value, maximum: 1.7 A
Overcurrent overload capability in normal operation: overload capability 150% Iout rated typ. 200 ms
Overload/short-circuit indicator: —
measuring point for output current: 50 mV =^ 1.3 A

Safety of 6EP3331-6SB00-0AY0
Primary/secondary isolation: Yes
Galvanic isolation: Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class: Class II (without protective conductor)
CE mark: Yes
UL/cUL (CSA) approval: cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
Explosion protection: ATEX (EX) II 3G Ex nA IIC T3; cULus Class I Div. 2 (ANSI/ISA- 12.12.01, CSA C22.2 No. 213) Group ABCD, T4, File E488866
FM approval: Class I, Div. 2, Group ABCD, T4
CB approval: Yes
Marine approval: ABS, BV, DNV GL, LRS
Degree of protection (EN 60529): IP20

EMC
Emitted interference: EN 55022 Class B
Supply harmonics limitation: not applicable
Noise immunity: EN 61000-6-2

Operating data
Ambient temperature of during operation: -25 … +70 °C (Note: with natural convection)
Ambient temperature of during transport: -40 … +85 °C
Ambient temperature of during storage: -40 … +85 °C
Humidity class according to EN 60721: Climate class 3K3, no condensation

Mechanics of 6EP3331-6SB00-0AY0
Connections:
● Supply input:      L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded
● Output:              +, -: 1 screw terminal each for 0.5 … 2.5 mm²
● Auxiliary:            –
Dimension : 36x90x53 (WxHxD)
Required spacing:
● top: 20 mm
● bottom: 20 mm
Weight, approx. : 0.12 kg